Water Damage Inspection

Water can be as damaging as it can be helpful. Water intrusion into a home can cause a lot of damage that would cost the homeowner a fortune. However, after the intrusion, the homeowner should take the bold step and contact a professional service who would handle the water damage inspection.

This is simply an assessment of the property in order to pinpoint the exact source of the water intrusion. The inspectors who handle this activity then prepare a comprehensive report on the best ways to do repairs and possible upgrades to avert future intrusion and subsequent damage.

A water damage inspection process entails a series of steps by the inspection company. These steps are as follows:

1. Identification of the source of flooding

This is the first process in the inspection process. Flooding may be caused by a number of factors like natural disasters as well as from the indoors. When water damage is caused by natural disasters like storms or overflowing rivers, the intrusion source becomes very obvious. However, water from indoors may cause a bit of a challenge to identify and spot their sources. These could be caused by bursting of pipes, unnoticed water sipping from the roof and into the walls for a long period of time, and much more.

The inspectors are trained to handle such scenarios and they come equipped with the necessary tools for the work. These tools include moisture detectors, thermal imaging cameras, and probes that can identify even the slightest amount of humidity in the house.

2. Classification of the water according to its sanitation level

The next step in the water damage inspection is the classification of the floodwater. The floodwater is normally categorized into three different groups namely:

White water – this is the cleanest of the three categories as well as the easiest to recover from. This simply means that the water would not pose an immediate threat due to chemical or biological contaminants. The water usually comes from rain, water heater overflows, and leaky faucets.
Grey water – this is the second cleanest of the three. It also does not pose an immediate threat to the well-being of the inhabitants of the house. Grey water can also be recovered from, though not as easy as for white water. The sources of these water include wash basins, baths and showers.
Black water – this is by far the most damaging of the three and the worst as far as sanitation is concerned. Black water can carry toxic substances, corrosive and harmful microbes which have the capacity to ruin property and cause health hazards to the people who are exposed to them. Black water normally comes from the toilet, sewage discharge, washing machine runoff, and much more. The water is the hardest to clean up and can require the use of specialized equipment to handle its effects.

3. Mapping the extent of damage

This is the final step in the water damage inspection process. The home inspector maps the extent of the water intrusion far beyond the view of the naked eye. Through the use of special equipment, the inspectors are able to identify the kind of havoc wreaked by the water intrusion. The inspectors then use this knowledge to help their client create a visual representation of the impact inflicted to give them an idea of the kind of repair work that would be needed. Recommendations are then made on the best ways to improve the property, make possible upgrades, do repairs in order to keep such unfortunate happenings at bay.

Posted in Uncategorized